What exactly is the difference between a surge protector and a fuse? Can a fuse protect the electronic devices from lightning instead of surge protector?
Last Updated: 21.06.2025 08:08

This is an electronic circuit designed to clamp voltages so that the Voltage Potential that appears at the outlet is never going to exceed the nominal value.
2024–10–14 [Omar Gharbi Omar Gharbi ]
Now when you have a certain ac resistance, then a current flows in a loop.
A circuit breaker is similar, but is resettable.
But it can get overloaded, and no longer works.
He then describes the function of a fuse.
2024–10–00 [ Ammar Mahdi ] Ammar Mahdi
Once the voltage goes over 0.0650 volts, then this fact can be used to amplify the difference, and turn the circuit breaker off , furthur down the line. Essentially that is what a RCD/GFCI does, it compares the incoming current, to the outgoing current, and if the difference between the two currents is over 5mA, then it trips the circuit breaker.
Is the question then , "why buy a surge supressor, if the fuse alone protects the electronic circuits from a lightning bolt?".
Prescription risk: Meds that could cause dementia - WFMZ.com
It’s been three xxx five werks, and there has been no response to my follow on query on his Commment to my answer.
In schematic diagrams this is the symbol for a fuse:
but I think this circuit , shows a few more pieces.
Why am I so jealous towards couples? Why am I tired of being single and feel my life is over?
So combined with a device called a MOV or Metal-oxide-resistor, then forms the 3rd part of a “surge suppressor “.
the problem then depends on "how fast does the fuse operate?".
This device then solves the entire problem.
Fallout Shelter has been downloaded over 230 million times in 10 years - Eurogamer
There are two important concepts here.
Upvotes:
This is a photo where a lightning bolt took out a home's complete mains distribution box, and a lot of electronic gear as well.
The Mysterious Inner Workings of Io, Jupiter’s Volcanic Moon - WIRED
If the nominal power is 4,000 watts then the current at 230volts is 16 amps.
“ A surge suppressor is the one which is connected at the input supply so that when there is a sudden change voltage it bypasses thereby protecting the (circuit) and electronic components”
The MOV will conduct when the voltage exceeds 50% of line voltage.
2024–10–16 [ OO OLAOYE OYEBODE ]
What does a fuse do?
[old diagram got deleted by accident]
What is world history that not many people know about?
OK, this is Mohan Rajaratnam’s definition of a Surge suppressor.
so, what happens?
There are three different concepts here that are getting confused.
Newgarden leads delayed first IndyCar practice at WWTR - RACER
So, the voltage could go up to 500 volts, and the fuse will not open up.
The third is lightning and “how it gets conducted into a home.”
At one ohm, the resistor has a maximum of 1 watt power.
What is the best sex you have ever had (in detail)?
It also is a device that limits the change in current flow.
but this device (an Inductor) … impedes the rapid changes in the current.
He then asserts :
Can people who have never met you tell if you are a covert narcissist?
Barnstars:
So, it’s possible that these devices from Trip Lite have addition suppression devices, these ones seem to be sturdy.
“ A fuse is a device which protects the (circuit) against overload and short circuit.”
Why is it so hard to date nowadays?
nine
This is where this question deviates from being a 'generic' question, and becomes more specific.
The bolt then partially travels down the line to your home.
This is a high voltage low current spike that comes down the line because of the power poles being struck, and the voltage suppressors activating on the primary side of the transformer.
a photo is worth a thousand words.
When the current is 200% of the rated value , it will “go open” (the link metal melts) and protect the device.
At least they know the answer if they wanted it.
A fuse is a non-resetable over current circuit protector.
P = e* I, so since I is 16 amps, then the voltage dropped is 1/16 volt or 0.0650 volts.
(Dc diagram shown, AC is similar).
Fuses, on their own, then operate much slower than the MOV variable resistance, during the lightning strike.
But during the surge, the fuse will not blow if it is a longer duration and lower value )10 to 50%).
“ … to protect building, lightning arrestor, is provided above building and directly connected to earth.”
This is the picture of an electronic coil of wire wound around a core of magnetic material.
Here is a simplified AC power diagram.
One
These devices are installed between the “hot” and “neutral” and protective ground.
At the secondary, it is 1000 times less.)turns ratio). If it gets hit with a 100,000 volt bolt of lightning then the voltage arrestors conduct and clamp the voltage down to line voltage, ( but a small amount leaks down the line). This is the problem.
The other is “what does a “fuse” do?”
First Sentence:
It seems Mohan does not understand the difference between a comment and an Answer.
so, the loop of wire then, when put together with another loop reduces the ‘noise’ on a power line.
These are simplified answers to the original question, and does not change anything I wrote above.
This is where the MOV conducts again, and dissipated the energy.
There is no harm in having the surge suppressor along with the fuse in the circuit. The fuse will not open up until the current melts the link. This will take time, and in the interim, that jolt will get transmitted into the power supplies.
Mohan forgets that a fuse is a one-time device, and needs to be replaced if it is tripped.
He then describes Rainy Season and Lightning.
what exactly is a ‘surge’ protector?
What is lightning?
2024–09–27 [ Mohan Rajaratnam Mohan Rajaratnam ] . Thinks you can get free electricity from nothing : Mohan Rajaratnam's answer to Is it possible to generate free electricity at home using a magnet or other low-cost methods? If so, how does it work?
[image of Common-mode choke]
Can the fuse protect the electronic devices from lightning instead of a surge protector.
2024–10–11 [Bobby Sanchez Bobby Sanchez ].
Because the load is inductive, the current lags the voltage.(by a bit).
I post the exact comment here.
Would individual surge supressors have save this equipment? most likely, since the surge supressor would take the jolt instead of the electronic components.
2024–10–10[John johnson John Johnson ]
This is 'the assistant's answer'
2024–10–11 [Victor Olarewsju Victor Olarewaju ]
(There is no concept of polarity, in the loop because the current changes direction 100 to 120 times a second (power frequency).
An AC voltage/ current source, and an ac inductive load.
Edit 2024–10.
And this is the problem alone. Is the power supply in the equipmemt designed with a lightning strike in mind? Some yes, others, no.
eight
For this case there are devices called Metal oxide varistors (MOV).
This one hit behind the barn.
One is “what exactly is in a ‘surge protector’ ? ”
Lightning arrestor is a spark-gap device, and can be installed anywhere. What is important, is that the wire is thick enough to withstand the lightning bolt and conduct the energy away from the building.
But… the neutral is now “floating” because of the 1 ohm resistance.